AXC offers the full line of products from DevilsOwn Performance Parts. If there is something they have that you want not seen on AXC please email Dustin for special pricing.
Water Methanol Injection by DevilsOwn
MINI Cooper Owners Learn Why and How a Meth Kit can help you run more HP and do it safely
DevilsOwn strives to be the best provider for your Water Methanol Injection System needs. We offer a complete selection of parts and accessories at the best prices for most supercharged and turbocharged vehicles. Among these are a number of custom built parts you can only find at DevilsOwn. Our newest addition is our custom-built check valve. This nickel plated brass check valve not only looks great but also insures anti-siphon protection. In addition the 250 PSI pump built specifically for DevilsOwn injection.
DevilsOwn Alcohol water injection is a method for cooling the combustion chambers of engines. By adding methanol water mix to the incoming air-fuel mixture. This allows for greater compression ratios. Largely eliminating the problem of engine knocking due to detonation. Many alcohol injection systems use a mixture of water and methanol (usually 50/50), partly because the methanol is combustible and will raise the octane level of the fuel. While water is not combustible, it has a greater capacity to cool the intake air temps down more than methanol alone. This effectively increases the octane rating of the fuel allowing performance gains to be obtained when used in conjunction with a supercharger or turbocharger, altered spark ignition timing, and increased boost levels.
MINI Cooper Supercharged Kit
The DevilsOwn Progressive alcohol/water injection kit's main function is to suppress detonation caused by high temperature and pressure developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Compressed air is heated air that causes power robbing and engine destroying detonation.
Cool the air with the DevilsOwn alcohol/water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burn engines. Methanol, with its 116 octane, high flash point and specific gravity, further reduces the chances of detonation.
Designed specifically for those who want to use their existing windshield wiper fluid tank located in your engine bay. The kit is provided with 15ft of nylon tubing, more can be purchased from our store if mounting the tank in the trunk if needed. This kit comes with hardware, electrical connectors, and fittings need to install this kit. Go to the tank
Benefits Of Water/Methanol Injection:
- Allows you to run safely more boost and/or more timing
- Reduce the intake charge temperature up to 50°F-200°F, results in a denser more powerful air/fuel charge
- Perfect for cars with thermal problems and prior tuned cars
- No loss of boost as with a inter cooler
- No wear issues only clean combustion chambers
- Reduce the specific fuel consumption
- 1 years full warranty
System Contents Include:
- Completely adjustable digital progressive controller
- 250 psi pump with EPDM seals for up to 50% methanol
- Heavy duty nickel plated anti siphon check valve
- 15 ft of black high pressure nylon tubing
- 2 Nickel plated outside nozzles Size #2 and #3 for MINI Coopers
- All necessary hardware
2.5 Bar Progressive Controller dvl-2001
The electronic progressive controller represents the latest technology in Water/Methanol system control. The dvl-2001 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire.
Shurflo Alcohol/Water Pump
- Long lifetime, 10+ Millions cycles
- No lost in pressure even with high volumes
- Dry run up to 1 hour
- Methanol-compatible
- EPDM Diaphragm High Volume pump
- 250PSI Output
Misting Nozzle
It became evident that greater precision water/methanol injection nozzle was needed. DevilsOwn committed to providing the best parts stepped up again with these. Its unique flow design provides superior atomization of water/methanol as well as more even distribution within the alcohol injection flow than other nozzles. Changing power levels takes only seconds and is simply a matter of changing the nozzle.
DevilsOwn nozzles consistently deliver superior, long-lasting, trouble-free performance. Each nozzle is tested individually on flow rate, spray angle, balance, and uniformity of spray. You can't find a better nozzle anywhere. The DVL-2700 features 1/8' npt threads on the outside of the nozzle so that it can be screwed in from the outside of your intake. With built-in O-rings, leaks are something that are only associated with our competitors. The removable screw-in 80 micron filter allows for easy cleaning, and the nozzles are nickel-plated to protect from methanol and increase their life.
The DVL-2700 nozzles disperse the alcohol/water mixture into the smallest droplets possible at any system pressure above 40psi and produce a fog-like mist. They are small in size and weight and allow for maximum air flow into your intake without blocking it. DevilsOwn designed this nozzle unique with the orifice recessed in a chamber that induces a low-pressure area to improve atomization when air passes over the. This dramatically improves atomization of the nozzle.
Purchase Supercharged MINI Cooper Kit (Includes all items shown above)
$360.00 + $15.00 Shipping
MINI Cooper DOM Installation Guide
By the way, don't forget your BRISK Silver Racing Spark Plugs!
OEM Headlight Washer Tank with all needed parts.
OEM Headlight Washer Tank with all needed parts.
$49.99 + $15.00 Shipping
2.5 Gallon Tank
This 2.5 Gallon tank will stand up to the heat of any engine bay. Choose this tank if you have plenty of space and want a high quality tank. Dimensions are 7 3/4" x 12 3/4" x 7 3/4". So It's best suited for trunk placement. This tank can be used for any alcohol water mix. It's 100% methanol compatible. This tank features a 2 1/4" opening for easy fill up. Cap is included. This tank does not come with fitting installed.
$57.00 + $10.00 Shipping
Float Switch
Self Seal Float Switch can easily be mounted in your alcohol/water tank. You just drill a 7/8"hole and slip it threw. Then just tighten the attached nut to provide a leak free seal. This will not work on MINI Cooper OEM Washer Tank above. Others on the market need to be dropped in from the fill hole and then use a nut to tighten it to the tank. This is simply the easiest on the market to install.
Material: Polypropylene, PVDF
Max pressure: 10bar
Max temperature: 100℃
Liquid density: from 0.6g/ml on
Design Features:
- High or low level sensing by rotating through 180º
- Internal fitting
- Reed Switch reliability
- Buna-N sealing components
- Easy installation
- Suitable for a wide range of liquids
Can be used with our controller as a warning system. Connect this level switch to the chassis ground with one of its wires and the other to the pumps ground wire. When the level drops the fault light on the controller will activate when the system sees your start point of boost. This can also be wired to a led light.
$25.00 + $7.50 Shipping
About DevilsOwn
DevilsOwn was founded by Bilal (pronounced Bill-Al) Muhammad, a medic in the United States Navy. Navy medics are commonly called Devil Doc by people in the military, much like a Marine is commonly called a devil dog. Bilal is very proud to serve his country and thus named this company DevilsOwn.
Bilal was recently asked to go overseas to fight in the war on terror. He asked a good friend of his to run the business for him in his absence. Chance McClurkin, a draftsman by trade, stepped up to the occasion and a partnership was made.
Why Choose DevilsOwn Injection?
We strive for excellence in everything we do. We want to have you back as a return customer. This means we will work to go above and beyond what you expect. Our goal is to "under promise and over perform". We don't just see each customer as a sale; we see an opportunity to make a difference.
FAQ
-
How does alcohol/water injection work?
By injecting a fine spray of alcohol/water into the inlet air stream of the engine, the charge air is dramatically cooled and the effective octane of the fuel is raised. Both help to eliminate detonation — the enemy of any engine, especially those using today's lower octane fuel under boost.
-
Can alcohol/water injection damage my motor?
Not if installed and used properly. As long as the injection system is working properly, it can only do good things. Since the alcohol will dissolve carbon buildup, it will help keep your plugs, valves, and combustion chambers very clean.
-
My turbo/supercharged engine runs standard boost, would alcohol/water injection increase the horsepower?
Alcohol/water injection will not increase the power usually. However, in areas where the ambient temperature is very high, injecting alcohol/water mixture will lower the inlet charge temperature and this will help produce a power increase.
-
Do your kits come with a tank?
All of our kits ship without a tank, but include the fittings to convert your existing washer tank for use with our system. Additional tanks can, however, be purchased separately here on this site. We want to let you have the options of what size tank if you need one.
-
I would like to increase my power output by increasing the boost pressure. Would alcohol/water injection help then?
It all depends, if you have good quality fuel and the ambient temperature is not too high you can normally get away with 2-3 psi of boost increase without using alcohol/water injection and will not run into detonation problems. On the other hand, if you DO NOT have good quality fuel, the ambient temperature is high, or there is a slight tendency for engine knock, then alcohol/water injection or a bigger intercooler is essential.
-
How much alcohol/water do I need spray?
Most cars should aim for 15% of their total fuel flow. Some more extreme setups run as much as 25% of their total fuel flow.
-
What kit should I get Stage 1 or Stage 2?
Our DevilsOwn Stage 1 "Base" injection kit incorporates a boost switch that activates the system at a specific PSI. It’s adjustable from 2-10 psi or 6-30psi, but you can run up to 250 PSI through the switch, so it’s very reliable. This system will turn on at a level you set and stay on until you drop below that level. It’s On/Off. It can’t dial in exact flow, but it can get you within a range.
DevilsOwn Stage 2 "Progressive" kits offer high functionality and performance, the ability to vary the flow based on inputs (maf, map, tps, ait, and any 0-5v source). Most users run it off of separate GM style map sensor if there car does not already have a map sensor. With the Stage 2 Kit you set a starting boost and a full boost and the system will progressively adjust the flow between those two points.
Both styles work. We tell our customers that if budget is the primary concern, get the base injection kit. If you have a little more money to spend or want something with more user control, the progressive kit is worth it.
-
What liquid should I run in this system?
We recommend DevilsOwn Brew, our proprietary methanol blend. Not only does methanol improve your fuel quality, it will also give you a better intercooling effect in the inlet tract.
Denatured alcohol can be used but we strongly advise our customers to use methanol for better, more consistent performance.
DevilsOwn recommends a mix of 49% methanol and 51% water. This is the perfect mixture for you to injection using your alcohol-water injection kit.
-
What is the maximum alcohol/water ratio your system can handle?
The wetted components in the pump head are chemically compatible with 100% methanol. The motor of this pump is not CLASS I explosion proof and therefore the pump is not compatible with 100% methanol. The rest of the components are engineered to withstand 100% methanol for the normal expected life of the product. We recommend using DevilsOwn Brew, our proprietary methanol blend, to reduce the risk of fire and improve consistency and performance.
-
Does the water "burn" in the engine?
No. The water simply converts from a vapor to a gaseous state which absorbs huge amounts of heat, due to the energy required to transform it.
-
What supporting upgrades are required for alcohol/water injection?
At minimum, your vehicle should have some sort of engine management that can be tuned, for example, the ability to adjust timing, boost, and fuel curves to compensate for the octane boost and cooling effects, and the ability to take advantage of the adjustments to make power.
You can run alcohol/water injection on a stock car with tunable engine management. It is not necessary to have after-market intakes, exhausts, intercoolers, or strengthened internals. However, with supporting mods that already increase the volumetric efficiency of the engine, more power can be made.
-
Why not use a windshield washer pump?
Alcohol/water must be injected at above 50psi to properly atomize. Pressure lower than 50psi causes greatly reduced air charge cooling as the result of larger droplets and their reduced total surface area.